Vertiv Liqui-tect LP6000, Инструкция по установке и эксплуатации

Страница: 72 / 82

BIT DESCRIPTION
00 1 = Zone17
01 1 = Zone18
02 1 = Zone19
03 1 = Zone20
04 1 = Zone21
05 1 = Zone22
06 1 = Zone23
07 1 = Zone24
08 1 = Zone25
09 1 = Zone26
10 1 = Zone27
11 1 = Zone28
12 1 = Zone29
13 1 = Zone30
14 1 = Zone31
15 1 = Zone32
Table 8.8 Status Flags (Register 30011)
6.2.3 Function 06: Preset Single Register
To set a parameter value, the master must send a Preset Single Register request packet. The Preset
Single Register request packet specifies a register and the data to write to that register. The register is
numbered from zero (40001 = zero, 40002 = one, etc).
READ REGISTER REQUEST PACKET READ REGISTERS RESPONSE PACKET
Slave Address (1 byte) Slave Address (1 byte)
06 (Function code) (1 byte) 06 (Function code) (1 byte)
Register (2 bytes) Register (2 bytes)
Data (2 bytes) Data (2 bytes)
Crc Checksum (2 bytes) Crc Checksum (2 bytes)
Table 8.9 Preset Single Register Packet Structure
Vertiv | Liqui-tect LP6000 Installer/User Guide | 72