Vertiv Tech EXS 0080kTK16FN01000, Руководство пользователя

Страница: 37 / 137

Vertiv | Liebert EXS 80kVA UPS | User Manual 23
Mechanical Installation
2.6.4. Storage Environment
If the UPS is not installed immediately, it must be stored with the original packaging in a room for protection
against excessive humidity and heat sources. The battery needs to be stored in a dry and cool place with good
ventilation. The most suitable storage temperature ranges from 20 °C to 25 °C.
Warning
During the storage period, the battery must be charged at regular intervals, in accordance with the battery instructions.
When charging the battery, you can temporarily connect the UPS to the mains to charge the battery and activate it.
2.7. Mechanical Requirements
2.7.1. Moving Cabinet
Warning
1. The lifting equipment for moving the UPS cabinet must have enough lift capacity. Refer to Table 10-3 for its weight.
2. Due to its intensity, the caster may not be valid on the uneven surface.
3. The center of gravity of the UPS cabinet is high; avoid falling over during the cabinet movement.
4. Vertical hanging of cabinet is not allowed.
5. During transportation and installation, the product tilt angle shall not be greater than 15
° .
Caution
When carrying the UPS with built-in batteries, you must independently fasten each battery string and keep the moving
distance to a minimum.
2.7.2. Clearance
Since the UPS does not have grille on either side, there are no special clearance requirements on both sides. In
addition to the local regulations, it is recommended that clearance around the front of the UPS should maintain
a clearance of at least 1200 mm to allow routine tightening of the power terminals within the UPS.
2.7.3. Cable Access Mode
For further description, refer to 3.1.8 Power Cable Connection Steps and 3.2 Wiring of Signal Cable .