User Serviceable Components (For Service Personnel)
1. All equipment maintenance and servicing procedures involving internal access requires the use of a tool and should
be carried out only by trained personnel. There are no user-serviceable parts behind covers requiring a tool/key for
removal.
2. The UPS meets the safety requirements completely in operator access area. Only service personnel can contact the
hazardous voltage inside the UPS. However, the risk of contacting these voltages is minimized because the components
with hazardous voltage may be contacted only by using a tool to remove the protective cover. No risk will exist if you
follow the general norms and in accordance with the procedures recommended in this manual on equipment operation.
Battery Voltage Exceeds 400 Vdc (For Service Personnel)
1. All physical battery maintenance and servicing procedures requires the use of a tool and should be carried out only by
trained personnel.
2. Operation on the battery will result in electric shock and high short-circuit current, therefore, before operating the
battery, the following should be observed:
Remove the watches, rings and other metal objects.
Use the tools with insulation handle.
Wear rubber glove and shoes.
Avoid to place the tools and metal objects on the battery surface.
Cut off the charge power supply before connecting or disconnecting the battery terminals.
Check whether the battery is earthed accidentally, if yes, please disconnect the earthing. Contacting any earth
battery parts will result in electric shock. Therefore, make sure that the battery is not earthed during installation
and maintenance.
3. Battery manufacturers provide the details of the precautions to be observed when working on, or in the vicinity of the
batteries. These precautions should be followed implicitly at all times. Attention should be paid to the recommendations
concerning local environmental conditions and the provision of protective clothing, first aid and fire-fighting facilities.
Warning
1. When selecting the UPS system upstream distribution protection equipment, ensure that it complies with the local
electric regulations.
2. When the internal fuse of the UPS is damaged, it must be replaced with fuse of the same electric parameters from the
designated manufacturer, and operated by qualified personnel.
•
•
•
•
•
•
Содержание EXS 0080kTK16FN01000
