Vertical SUMMIT IP
Hardware Description and Installation Manual
Issue
1.2
85
9. Before License upload, make sure that the date of system is set correctly. Click
[Select
file]
button and then open the pop-up folder. Select a valid license file to upload to the
Vertical SUMMIT IP system and click the
[Start]
button. If the file which is sent to the
system is “System License File”, it will be saved and automatically applied without restart.
The enabled features by uploading license file can be shown in “System Overview” page.
10. The Wizard includes a password entry page.
It is strongly recommended that a
unique User ID and strong password be entered to minimize the risk of admin and
maintenance access by unauthorized personnel.
In order to finish the final step, you should register at least a maintenance ID. If not so,
the Wizard can’t go on to the next. Also, Keyset admin password can be registered in
this page.
NOTE
The new information will be in effect immediately upon saving the information. When a
new Admin User ID and Password are saved, the Web login screen appears. A new
Admin session will be required using the new login credentials.
