Vertical SUMMIT IP
Hardware Description and Installation Manual
Issue 1.2
82
3. Click
[Select files]
button and then open the pop-up folder. Select the desired file to
upload to the system’s memory and click the
[Start]
button. The file is sent to the
system’s memory, saved and automatically loaded upon a system reset or restart.
4. During initialization, the system employs the Nation Code to establish the default gains
and tones for the various interfaces (analog CO Lines, ISDN lines, etc.), as well as the
numbering plans for the specific country. The gains, in particular must be set to comply
with the local regulatory requirements.
Normally, the Nation Code will be set at the factory, however assure the Nation code
matches the system location. If not,
turn SW 1 Pole 2 of KSU to ON
, change the Nation
Code and save the page. If the code is changed, after saving the page the system will
initialize automatically to properly set the gains, tones and numbering plan for the
selected country. In addition, all other data will be initialized so, the Nation Code should
be properly set prior to other programming.
