Versatile AutoBoom SX275, Руководство по установке

Страница: 49 / 62

4
Manual No. 016-0230-097 Rev. H 45
UltraGlide
FIGURE 12.
Machine’s Boom Function Controls
Note:
The S1 coil is located furthest from the machine’s hydraulic valve, and the S2 coil is located
closest to the machine’s hydraulic valve.
11.
Locate the machine’s boom function coils near the machine’s hydraulic valve.
12.
Disconnect the connector from the machine’s left tilt up coil (S1-2 on port SV3).
13.
Install a boom sense adapter cable (P/N 115-0171-546) between the coil and the machine’s coil connector.
14.
Connect boom sense adapter cables between the left tilt down (S2-12 on port SV3), right tilt up (S1-13 on
port SV7), and right tilt down coils (S2-3 on port SV7) and the coil connectors.
15.
On the harness cable, locate the LEFT SOLENOID SENSE connectors. Isolate the connector labeled Up
and connect it to the left tilt up coil via the installed boom sense adapter cable.
16.
Connect the down LEFT SOLENOID SENSE connector to the left tilt down coil via the installed boom sense
adapter cable.
17.
Connect the RIGHT SOLENOID SENSE connectors to the machine’s right tilt up and right tilt down coils via
the installed boom sense adapter cables.
Install the Center Rack Control
FIGURE 13.
Center Rack Control Cabling
1.
Locate the center up coil on the machine’s hydraulic valve.
2.
Unplug the coil connector from the center up coil (S1-11 on port SV1).