Versatile AutoBoom SX275, Руководство по установке

Страница: 44 / 62

Chapter 4
40 Versatile SX275 AutoBoom™ Installation Manual
Install the UltraGlide Sensors
Boom Sensor Mounting Locations
Sensor mounting locations may be influenced by the boom configuration. Determine the appropriate location
for mounting sensors on the boom, ensuring the sensors will not interfere with or be damaged by folding or
unfolding the booms. The sensor should be mounted outside of the boom fold, but inside of the boom
breakaway.
Mount the Boom Sensors
FIGURE 7.
Mounted Left Boom Sensor
1.
Secure the left sensor (P/N 063-0130-014) to the front of the left boom using two 1-9/16” W x 2-1/2” L x 3/8”
thread U-bolts (P/N 107-0171-611) and four 3/8”-16 zinc flanged lock nuts (P/N 312-1001-164).
2.
Tighten the nuts to ensure the sensor is mounted securely.
3.
Repeat the steps above to install the remaining boom sensor(s).
Note:
When installing optional inside boom sensors, install the sensors in the location shown in the
figure above to ensure the sensor clears the cab when the booms are folded.
WARNING
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
Outer Boom Sensor Mounting Location Inside Boom Sensor Mounting Location (Optional)