Versatile AutoBoom SX275, Руководство по установке

Страница: 20 / 62

Chapter 3
16 Versatile SX275 AutoBoom™ Installation Manual
6.
Disconnect the tank hose from the tank port of the machine’s hydraulic valve.
7.
Install a 3/4” JIC M/M/F swivel run tee adapter fitting (P/N 333-0012-039) in the tank port of the machine’s
hydraulic valve.
8.
Attach the machine’s tank hose to the opposite end of the installed tee fitting.
9.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-655) on the 90° end of the installed tee
fitting.
10.
Connect the 45° end of the installed hydraulic hose to Port T of the AutoBoom valve.
Install the Left and Right Cylinder Up Hoses
Note:
The left cylinder up hose is located in port C6 in machines with 90 - 100 ft. booms and in port C10
in machines with 120 ft. booms. The right cylinder up hose is located in port C15 in machines with
90 - 100 ft. booms and in port C17 in machines with 120 ft. booms.
FIGURE 10.
Machine’s Cylinder Orifice Fitting
1.
Disconnect the machine’s cylinder up hoses from the base-end of the machine’s tilt cylinders.
2.
Remove the orifice fittings installed between the existing elbow fittings and the cylinder up hoses.
Note:
Keep the orifice fittings for future use.
3.
Reattach the cylinder up hoses to the base-end of the machine’s tilt cylinders.
FIGURE 11.
Left Cylinder Up Hoses Installed
Left Up Hose
Hydraulic Valve
Connection
LC Port AutoBoom
Valve Connection