Versatile AutoBoom SX275, Руководство по установке

Страница: 19 / 62

3
Manual No. 016-0230-097 Rev. H 15
PowerGlide Plus
2.
Secure the mounting plate to the machine’s center rack top-right parallel link using two 4” W x 5” L x 3/8”
thread U-bolts (P/N 107-0171-606) and four 3/8”-16 zinc flanged lock nuts (P/N 312-1001-164).
Install the Pressure and Tank Hoses
FIGURE 9.
Pressure and Tank Hoses Installed
1.
Disconnect the pressure hose from the pressure port (P) of the machine’s hydraulic valve.
2.
Install a 3/4” JIC M/M/F swivel run tee adapter fitting (P/N 333-0012-039) in the pressure port of the
machine’s hydraulic valve.
3.
Attach the machine’s pressure hose to the opposite end of the installed tee fitting.
4.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-655) on the 90° end of the installed tee
fitting.
5.
Connect the 45° end of the installed hydraulic hose to Port P of the AutoBoom valve.
WARNING
Hydraulics are under pressure. Care should
always be taken with a system that has been
pressurized. When disconnecting or purging
hydraulic hoses, be aware that the hydraulic
fluid within the machine’s system may be
extremely hot and under high pressure.
CAUTION
When installing AutoBoom hydraulics or
performing diagnostics, maintenance, or routine
service, ensure precautions are taken to
prevent any foreign material or contaminants
from being introduced into the machine’s
hydraulic system.
Objects or materials that are able to bypass the
machine’s hydraulic filtration system will reduce
performance and possibly cause damage to the
AutoBoom hydraulic valves.