Versatile AutoBoom SX275, Руководство по установке

Страница: 41 / 62

4
Manual No. 016-0230-097 Rev. H 37
UltraGlide
9.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port LC of the AutoBoom valve.
10.
Disconnect the machine’s right cylinder up hose from port C15 or C17 of the machine’s hydraulic valve.
11.
Install the machine’s orifice fitting removed in step 2 above into the open port.
12.
Install a 9/16” JIC M/M/F swivel run tee adapter fitting (P/N 333-0012-043) in port C15 or C17 of the
machine’s hydraulic valve.
13.
Connect the machine’s right cylinder up hose to the opposite end of the installed tee fitting.
14.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-625) on the 90° end of the installed tee
fitting.
15.
Connect the 90° end of the installed hydraulic hose to the fitting installed in Port RC of the AutoBoom valve.
Install the Left and Right Cylinder Down Hoses
Note:
The left cylinder down hose is located in port C5 in machines with 90 - 100 ft. booms and in port
C9 in machines with 120 ft. booms. The right cylinder down hose is located in port C16 in
machines with 90 - 100 ft. booms and in port C18 in machines with 120 ft. booms.
FIGURE 6.
Left Cylinder Down Hoses Installed
1.
Remove the left tilt cylinder down hose from port C5 or C9 of the machine’s hydraulic valve.
2.
Install a 9/16” JIC M/M/F swivel run tee adapter fitting (P/N 333-0012-043) in the left cylinder down port of
the machine’s hydraulic valve.
3.
Connect the machine’s left cylinder down hose to the opposite end of the installed tee fitting.
4.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-623) on the 90° end of the installed tee
fitting in port C5 or C9.
5.
Connect the 90° end of the installed hydraulic hose to the installed fitting in Port LF CYL RTN of the
AutoBoom valve.
6.
Remove the right tilt cylinder down hose from port C16 or C18 of the machine’s hydraulic valve.
7.
Install a 9/16” JIC M/M/F swivel run tee adapter fitting (P/N 333-0012-043) in the right cylinder down port of
the machine’s hydraulic valve.
8.
Connect the machine’s right cylinder down hose to the opposite end of the installed tee fitting.
9.
Install the straight end of the supplied hydraulic hose (P/N 214-1000-624) on the 90° end of the installed tee
fitting in port C16 or C18.
10.
Connect the 90° end of the installed hydraulic hose to the installed fitting in Port RT CYL RTN of the
AutoBoom valve.
Hydraulic
Valve Left
Down
Hose
LF CYL
RTN