Versatile AutoBoom SX275, Руководство по установке

Страница: 45 / 62

4
Manual No. 016-0230-097 Rev. H 41
UltraGlide
Mount the Center Rack Sensor
FIGURE 8.
Mounted Center Sensor
1.
Mount the center sensor (P/N 063-0130-018) to the left side of the machine’s center rack vertical support
tube using two 2-1/16” W x 3” L x 3/8” thread U-bolts (P/N 107-0171-609) and four 3/8”-16 zinc flanged lock
nuts (P/N 312-1001-164).
2.
Tighten the nuts to ensure the sensor is mounted securely.
Connect the Sensor Cables
1.
Connect the left sensor cable (P/N 115-0230-051) to the connector on the left sensor.
2.
Route the left sensor cable toward the Autoboom valve.
3.
Loop and tie-off any excess cable, allowing enough cable for boom folding and extension.
4.
Repeat the steps above to connect the remaining sensor cable(s).
Note:
The sensor cables will be connected to the AutoBoom system in the wiring phase of installation.