Tabs
(two per side)
Slots (Qty: 4.
Two per side)
Slot
CFDV Series Gas Fireplace
20306739
47
FINAL INSTALLATION
FIREGLASS ONLY PLACEMENT
Mix the fi reglass and sprinkle over the burner, false bot-
tom and on the inclined front edge of the false bottom.
Build the glass up toward the top of the incline.
NOTE:
Do not allow glass down in the pilot area to elimi-
nate obstructing the pilot fl ame.
CAUTION: Do not place any glass between the burn-
er and the false bottom as this will effect the perfor-
mance of the unit. Use a vacuum to remove any glass
in the event it has fallen and is blocking the air gap.
NOTE:
Remove any glass in bottom door track.
Replace safety barrier, glass, access panel and canopy in
reverse order of removal.
Figure 77
Figure 78
NOTE:
A barrier designed to reduce the risk of burns
from the hot viewing glass is provided with this
appliance and shall be installed for the protection of
children and other at risk individuals. If the barrier
becomes damaged, the barrier shall be replaced with
the manufacturer's barrier for this appliance.* Any
safety screen, guard, or barrier removed for servicing
the appliance must be replaced prior to operating the
appliance.
* See parts list for model number.
SAFETY BARRIER INSTALLATION
INSTRUCTIONS
DANGER
HOT GLASS
WILL
CAUSE BURNS
.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
A barrier designed to reduce the risk of burns from
the hot viewing glass is provided with this
appliance and shall be installed.
CERTIFIED
S
AFETY
B
ARRIER
1. Remove screen from packaging.
2. Align the four tabs on the sides of the screen frame
(two top, two bottom)
Figure 77
with the correspond-
ing slots on the fi rebox.
Figure 78.
3. Slide the screen down into the slots until it fi ts
securely in place.
NOTICE
: It is the responsibility of the installer to ensure
the barrier is affi xed to the fi replace at the time of instal-
lation.
WARNING: The safety screen barrier
must be installed after the glass front is
in place. It is NOT a replacement for the
glass and the unit must NOT be oper-
ated without the glass in place.
