67
User guide
Procedure:
1. Swipe left or right to go to the second idle screen, navigate
to
Settings > Basic > Wi-Fi
2. Select
> Add
3. Enter the desired value in the Network SSID field
4. Tap the desired value in the Security field
• If you select WEP or WPA/WPA2 PSK, enter
the password
• If you select 802.1x EAP, tap the desired value in the EAP
method field, and enter additional information
5. Select
Show password to make the password visible
6. Select
Show advanced options to configure the HTTP
proxy for the Browser
7. Tap
Save
Related topic:
Activating Wi-Fi mode
Viewing the wireless network information
You can view detailed wireless network information, such as
profile name, SSID and signal strength.
Procedure:
1. Swipe left or right to go to the second idle screen
2. Navigate to
Settings > Basic > Wi-Fi
3. Tap
Wireless Status
4. Optional: Drag up and down to scroll through the list of
wireless network information
Disconnecting from a wireless network
You can disconnect a wireless network connection from
your phone.
Procedure:
1. Swipe left or right to go to the second idle screen
2. Navigate to
Settings > Basic > Wi-Fi
3. Tap the connected SSID (the top one)
4. Tap
Forget
Tip: You can also disconnect from the wireless network by
deactivating Wi-Fi mode.
Related topic:
Deactivating Wi-Fi mode
Related topic:
Activating Wi-Fi mode
Connecting to a wireless network using Wi-Fi
Protected Setup
You can connect to the wireless network by using Wi-Fi
Protected Setup (WPS) to make the connection easier.
WPS provides simplified mechanisms to configure secure
wireless networks. WPS can automatically configure a wireless
network with a network name (SSID) and strong WPA data
encryption and authentication.
There are two supported methods in the Wi-Fi protected setup:
•
Push-button configuration (PBC):
The user simply has to
press the WPS key on both the phone and gateway/ router
to connect
•
Personal identification number (PIN):
The user enters the
PIN generated randomly by the phone on the gateway/
router to connect
Before you begin:
Make sure that Wi-Fi mode is activated.
Procedure:
1. Swipe left or right to go to the second idle screen
2. Navigate to
Settings > Basic Settings > Wi-Fi
3. Do one of the following:
• Select
> WPS
to use the PBC method, then long-tap
the WPS key on your gateway or router
Once WPS setup has completed successfully, the phone
screen will display the message “Connected.”
• Select
> WPS-PIN
to use the PIN method, then log
into your gateway or router’s web interface, and configure
it to search the clients. For more information, refer to the
documentation from the gateway or router manufacturer
Once WPS-PIN setup has completed successfully,
the web interface of the gateway or router will display
whether the connection is successful.
Related topic:
Activating the Wi-Fi Mode
Adding a wireless network manually
If your gateway/router has SSID broadcast disabled, it doesn’t
appear in the scanning results. Then you must manually add a
wireless network.
Before you begin:
Get the available wireless network information from your
system administrator. Make sure that Wi-Fi mode
is activated.
