manualshive.com logo in svg

Verizon 4G LTE, Руководство пользователя

Поделиться
Скачать
Verizon 4G LTE Скачать руководство пользователя страница 91

Troubleshooting

90

Verizon 4G LTE Broadband Router 

Internet Port Internet Port LED is 

off.

Be sure the SIM card that you received is in the router. SIM cards from other 
electronics do not function in the router, and this SIM card does not function 
in other electronics.

Internet Port LED is 
amber.

The router cannot connect to the Internet. Check the Internet connection 
being used.

•

For a mobile broadband connection, check the Signal Quality LED.

•

For an Ethernet connection, check the WAN Port LED.

Internet Port LED is 
blinking amber and 
green.

The traffic meter feature is enabled, and the limit set has been reached. 

Wi-Fi

Wi-Fi LED is off.

The Wi-Fi radio is off. For a Wi-Fi connection with the router, press the 

Wi-Fi

 

button to turn the Wi-Fi radio back on.

Wi-Fi LED is not 
blinking.

If this LED does not blink when you are attempting to send data over the 
Wi-Fi link, log in to the router menu using the Ethernet connection and 
check your router’s Wi-Fi settings.

 Ports

 Ports LED is off.

If this LED does not light when an Ethernet connection is made, check the 
following:

•

The Ethernet cable connections are secure at both ends.

•

The power is turned on to the connected hub or workstation.

WAN Port

WAN Port LED is 
off.

If using an Ethernet connection, check the following:

•

The Ethernet cable connections are secure at both ends.

•

The power is turned on to the modem.

4G LTE

4G LTE LED is off.

The router cannot detect a 4G LTE signal.

Signal 
Quality

Signal Quality LED 
is off or amber.

If this LED does not light when a mobile broadband connection is used, 
check the following:

•

Ensure that good coverage exists in the area by checking with your 
Internet service provider.

•

Ensure that your mobile broadband account is active.

•

Ensure that the SIM card is inserted correctly into the router.

•

Move the router near a window or other area of the building. Log in to 
the router menu and check the Internet configuration. Check that the 
user name, password, and network name are set correctly. If you use a 
PIN to connect to the Internet, check that it is entered correctly.

LED (continued)

Action (continued)

Содержание 4G LTE













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды