Verizon 4G LTE Скачать руководство пользователя страница 53

Страница: 53 / 108

Manage Your Network

Verizon 4G LTE Broadband Router

- Gateway IP Address

: Your router’s IP address.

- Domain Name Server

: Your router’s DNS server IP address. This address is

found dynamically from the ISP.

- Modem Identity

: The modem in use.

- Modem SW version

: The software version of the modem.

- Modem driver version

: The driver version of the modem.

- IMSI

: International Mobile Subscriber Identity. The SIM card identity.

- MDN

: Mobile Directory Number.

- UICC

: Universal Integrated Circuit Card number.

- Access Number

: Service provider access number.

- IMEI

: International Mobile Equipment Identity. The unique identity of the modem.

- Operator

: The ISP for the broadband wireless network.

- Network mode

: The mode of the current network the modem is connected to.

This value is dependent on coverage and distance from the cell site.

- Network band

: Current network band.

•

Port

. See

LAN Setup

on page 70.

- MAC Address

: The Ethernet MAC address used by your router’s LAN port.

- IP Address

: The LAN port IP address. The default IP address is 192.168.0.1.

- DHCP

: If

Off

, IP addresses are not assigned to computers on the LAN. If

, IP

addresses are assigned to computers on the LAN.

- IP Subnet Mask

: The LAN port IP subnet mask. The default IP is 255.255.255.0.

•

Wi-Fi Port

. See

Indoors, computers can connect over Wi-Fi networks at a maximum

range of up to 300 feet (100 meters). Such distances can allow others outside your
immediate area to access your network

on page 26.

- Network Name (SSID)

: The service set ID, or Wi-Fi network name.

- Region

: The country where your router is set up for use.

- Channel

: The current channel, which determines the operating frequency.

- Wi-Fi AP

: Indicates if the Internet feature is disabled or not. If not enabled, the

Wi-Fi LED on the front panel is off.

- Broadcast Name

: Indicates if your router lets other users know its network name.

Содержание 4G LTE













































































































Результаты поиска

Содержание 4G LTE

Отзывы:

Бренды по названию

Популярные бренды

Verizon 4G LTE, Руководство пользователя

Результаты поиска

Содержание 4G LTE

Отзывы:

Бренды по названию

Популярные бренды