manualshive.com logo in svg

Verizon 4G LTE, Руководство пользователя

Поделиться
Скачать
Verizon 4G LTE Скачать руководство пользователя страница 71

Advanced Router Settings

70

Verizon 4G LTE Broadband Router 

 LAN Setup

The 

Local Area Network (LAN) Setup

 screen provides configuration of LAN IP services 

such as DHCP and Router Information Protocol (RIP). 

Your router’s default setup is to use private IP addresses on the LAN side, and to act as a 
DHCP server. The default LAN IP configuration is:

•

LAN IP address

: 192.168.0.1

•

Subnet mask

: 255.255.255.0

These addresses are part of the Internet Engineering Task Force (IETF)–designated private 
address range for use in private networks, and should be suitable in most applications. If your 
network requires a different IP addressing scheme, make the changes in this screen.

Tip:

If you change the LAN IP address of your router while connected through 
the browser, all users connected to the router will be disconnected. To 
reconnect, open a new connection to the new IP address and log in 
again. Others using the router must restart their computers to connect to 
the router again.

To see or change the LAN setup:

1.

Sign in to the web user interface.

2.

From the main menu, select 

Router Settings > Advanced > LAN.

 

Содержание 4G LTE













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды