Verint Nextiva S2750e Series, Руководство пользователя

Страница: 16 / 74

2: Mounting and Configuring the IP Camera
10 Verint Video Intelligence Solutions
3. Insert the required plug on the power supply then turn it in the clockwise direction until
you hear a click.
4. Tie together the power supply wire with the dashed white lines and the black wire on
the camera using a splice.
5. Tie together the other power supply wire and the red wire on the camera using a splice.
6. Power the camera by connecting the electric plug into the outlet.
To connect the PoE kit sold by Verint:
1. Plug a straight-through Ethernet cable into the network (RJ-45) connector of the
device.
2. Plug the other end of the cable into the DATA & PWR port of the injector.
3. Connect another Ethernet cable (straight-through or crossover) into the DATA port of
the injector.
The crossover cable directly connects the IP camera to a computer; use a
straight-through cable to connect the IP camera to a hub or a switch for integration
with the network.
4. Connect the other end of the second cable into an Ethernet equipment.
5. Power the device by plugging the power cord between the injector and the outlet.
Warning: To avoid damaging your Ethernet equipment, ensure that the cable is
connected into the DATA port of the PoE injector, and not in the DATA & PWR
port.
Note: The combined length of the two Ethernet cables cannot exceed 328 feet
(100 meters). For example, if you used an 82-foot (25m) cable in step 1, the
maximum length of the second cable is 246 feet (75m).
1
2 3
4
J2
DATA
J1
DATA & PWR
5
RJ-45
Power cord
PoE injector
Straight-through
Ethernet cable
Ethernet cable (straight-through or
crossover)