Verint Nextiva S2750e Series, Руководство пользователя

Страница: 32 / 74

3: Using the Web Interface
26 Verint Video Intelligence Solutions
4. In the IP Firmware Update list, indicate whether firmware updates on the device
through the IP network are enabled.
5. In the HTTP Access list, indicate whether the access to the web interface of the device
in a non-secure context is enabled. If you block this access, you can only set up the
device with SConfigurator or Telnet.
6. In the Secure HTTP Access list, indicate whether the access to the web interface of
the device in a secure SSL context is enabled. If this context is enabled, you access the
device with
https:// IP-address
in your web browser and the user account mode is
automatically activated (described on page 24).
7. whetherIn the Global Security Profile list, indicate whether the complete SSL security
on the device is enabled. Once this profile is activated on a device:
†
You cannot access it anymore with Telnet.
†
You cannot perform firmware updates through the IP network.
†
You access its web interface in a secure mode (that is, the secure HTTP access
mode is enabled).
8. In the SSL Passkey box, enter a password to secure the connection with the device.
The passkey must be the same for all devices and the software tools to allow proper
secure communication between them.
9. To continue the configuration process, select another parameter category in the
navigation pane. Otherwise, click Apply to save the changes in the device. Depending
on the changes you made, a reboot may be required; follow the on-screen instructions
in the Device Configuration Submittal pane.
Tip: You should not change this passkey with the web interface, since there could be
eavesdropping on the network. You can use SConfigurator or a video
management software to change it.