Verint Nextiva S2750e Series, Руководство пользователя

Страница: 42 / 74

3: Using the Web Interface
36 Verint Video Intelligence Solutions
3. In the VSIP Multicast IP Address box, enter the IP address used by the device to
listen for VSIP queries. The current multicast address is 224.16.32.1 and should not be
changed.
4. In the VSIP Discovery IP Address box, enter the IP address used by the device to
make its presence known with the broadcast method. The broadcast address is
255.255.255.255.
5. In the VSIP Unit Name box, enter the name of the device, as displayed in the top of
the web interface and in the first column of the SConfigurator unit list.
6. To continue the configuration process, select another parameter category in the
navigation pane. Otherwise, click Apply to save the changes in the device. Depending
on the changes you made, a reboot may be required; follow the on-screen instructions
in the Device Configuration Submittal pane.
Configuring System Time
The device can connect to a Network Time Protocol (NTP) server to get the current time.
The main reason to use NTP is to display valid dates in the log files instead of the device
uptime.
The Local Time parameter indicates the current local time if the device is connected to an
NTP server.
To configure the system time parameters:
1. In the navigation pane, expand Configuration > Advanced, then click System Time.
The system time parameters appear.
2. In the NTP Server Usage list, indicate whether Network Time Protocol (NTP) is used to
get the current time. NTP uses GMT to synchronize device clock time.
3. In the NTP Server IP Address box, enter the IP address of the NTP server from which
the device will get the current time.
4. In the NTP Server IP Port box, enter the IP port of the NTP server. Default is 123.