Verint Nextiva S2750e Series, Руководство пользователя

Страница: 21 / 74

Verint Video Intelligence Solutions 15
Nextiva S2750e Series User Guide
Setting Network Parameters
The first step in configuring is to provide a typical initial configuration of its network
parameters (including its IP address) to ensure compatibility with an existing network.
After providing the network settings, you complete the configuration with SConfigurator,
the web interface, or your video management software.
To set the network parameters:
1. Power the camera and establish its Ethernet connection.
2. Start SConfigurator by double-clicking
SConfigurator.exe
on your hard disk. The
SConfigurator window appears.
3. In the General tab, click Program Options. The Program Options window appears.
4. Check Detect All Units on LAN.
5. Ensure that the VSIP Port is 5510; otherwise, click Default.
6. Ensure that the Discovery IP Address is 255.255.255.255; otherwise, click Reset to
Broadcast.
7. Click OK.
Note: To work properly, devices on the same network must have unique IP addresses. The
device will not prevent you from entering a duplicate address. However, its system
status LED will turn to flashing red (1-second interval); then the device will use its
default address. You then need to configure it with a proper IP address.
Warning: Never use PoE and 12V DC at the same time. It may damage the camera.