Verint Nextiva S2750e Series, Руководство пользователя

Страница: 40 / 74

3: Using the Web Interface
34 Verint Video Intelligence Solutions
10. In the Rate Control Mode list, select the mode controlling the file size variation. The
available modes are:
†
CFS (Constant File Size)—The quality of the images may vary, but their size will be
targeted to the value specified by the Target File Size parameter.
†
VFS (Variable File Size)—The quality of the image is set by the Variable File Size
Quality parameter, but the size of the image will vary, depending of the encoded
image.
11. In the Target File Size box, enter the target size of each image that will be encoded
(in Kbytes), if the rate control mode is CFS. The available values are in the 1–100
range.
12. In the Variable File Size Quality list, select the quality of the encoded images, if the
rate control mode is VFS. The value range is from VFS1 (high quality) to VFS7 (worst
quality).
13. To continue the configuration process, select another parameter category in the
navigation pane. Otherwise, click Apply to save the changes in the device. Depending
on the changes you made, a reboot may be required; follow the on-screen instructions
in the Device Configuration Submittal pane.
Looking at Video Status
The video status presents the current values of video characteristics for each video
encoder. These internal parameters are useful when troubleshooting the device with the
assistance of a customer service specialist.
To see the video status of the device:
1. In the navigation pane, expand Configuration > Advanced > Video Status, then
click the desired encoder. The video status parameters appear.
The available information is: