Verint Nextiva S2700e, Руководство пользователя

Страница: 53 / 101

Verint Video Intelligence Solutions 43
Nextiva S2700e Series User Guide
Network
The Network menu allows you to configure several parameters to ensure compatibility
between the device and its IP network. The parameters are:
„
DHCP Configuration—To enable or disable the use of DHCP (Dynamic Host Configuration
Protocol) and automatically get a valid network configuration for the device from a
server. You can set this option only if the device is connected to a network that uses a
DHCP server. For more information about DHCP, see Appendix B on page 67.
„
Local IP Address—The unique IP address of the device on the network. The IP address
format is a 32-bit numeric address written as four numbers separated by periods. Each
number is in the 0–255 range. Each device on a network must have a unique IP
address.
„
Subnet Mask—The binary configuration that specifies the subnet in which the IP address
of the device belongs. A subnet is a portion of a network that shares a common address
component. Unless otherwise specified by your network administrator, it is
recommended to use a subnet mask of 255.255.0.0.
„
Gateway—The IP address of the network point that acts as an entrance to another
network. Never use the IP address of the device as the gateway value.
„
Host Name—An alias for the IP address of the device, to be used by the DNS server. It
is made up of 2 to 24 alphanumerical characters; the first one must be a character. This
parameter is optional.
For more information about these settings, contact your network administrator.
Video
You can configure parameters relative to the following video functions of the device:
„
Common parameters
„
Encoder parameters
Note: It is up to the DHCP server to register the host name in the DNS server.