Verint Nextiva S2700e, Руководство пользователя

Страница: 42 / 101

2: Mounting and Configuring the IP Camera
32 Verint Video Intelligence Solutions
Performing a Point-to-Point Connection
c
A point-to-point connection is the association of a transmitter and a receiver to view video
coming from an analog camera on an analog monitor. The IP camera acts as a transmitter
in this context. The Nextiva receivers are the S1970e-R and S1504e-R. You can connect
each of these receivers to up to four transmitters, to create a maximum of four different
point-to-point connections. Here is a single connection:
You can also use a point-to-point connection to transfer audio, input/output, or serial port
data, if the transmitter and receiver have these features.
Typically, both devices sit on the same IP subnet as SConfigurator and have the same VSIP
port; to access other devices, refer to the device discovery section in the Verint
SConfigurator User Guide.
To associate a transmitter and a receiver in a point-to-point connection:
1. Start SConfigurator.
2. In the Units tab, discover the desired devices.
The discovered devices appear in the Units box.
3. Select the Connections tab, then click Add.
The Connection Creator window appears.
4. Select a transmitter in the left column and a receiver in the right one.
In the Transmitters column, you have access to the two encoders of each input; the
video stream is the same for both. Encoder1 is always reserved for viewing live video
with the web interface, therefore you should use Encoder2 for point-to-point
connections; however, you can use the same encoder for both functions if you want the
same resolution and frame rate.
Transmitter (camera) Receiver