MEDICA-D 7/15 US
Operator Manual
ELGA
Page 12
MEDICA-D 7/15 US MANU40550 Version 2
– 05/17
5. INSTALLATION INSTRUCTIONS
5.1 Unpacking the
MEDICA-D 7/15 US
The following items should be supplied with your
MEDICA-D 7/15 US
:
1.
MEDICA-D 7/15 US
unit
2. Cartridge pack LC141
3. Sanitization by-pass block fitted in the unit
4. Installation kit LA637
5. Operator manual
6. Mains lead
5.2 Positioning the
MEDICA-D 7/15 US
Before commencing with installation and operation of the
MEDICA-D
7/15 US
unit, please read and observe the following points.
Environment
The unit should be installed on a flat, level surface, in a clean,
dry environment. The unit can also be wall mounted against a
vertical wall capable of supporting the weight (for this we
recommend the use of the wall mounting kit Part No LA610).
CAUTION
!
If unit is to be wall mounted, ensure it is
mounted on a substantial brick or concrete
solid wall capable of supporting the
operating
weight
of
the
system.
If
mounting the unit on the wall, use the wall
mounting kit and follow the instructions
included in the kit.
Note:
Refer to specifications for unit weights.
The unit is designed to operate safely under the following
conditions:
Indoor use
Altitude up to 2000m
Temperature range 5 - 40°C
Maximum relative humidity 80% @ 31°C decreasing linearly
to 50% @ 40°C, non-condensating
The unit is in Installation Category II, Pollution Degree 2, as per
IEC1010-1.
