MEDICA-D 7/15 US
Operator Manual
ELGA
Page 16
MEDICA-D 7/15 US MANU40550 Version 2
– 05/17
5.4 Initial Controller Set Up
The
MEDICA-D 7/15 US
control panel is fitted with three control
buttons. These are:
1. The PROCESS button, which switches the
purification process ON and OFF.
2. Two software controlled touch pad buttons which
are used to control functions for set up and
process control.
When the
MEDICA-D 7/15 US
unit is started for the first time after
installation the following steps should be followed in order to set up
system preferences:
Step 1 - Setting Up Menu Options
1. SWITCH the mains power on
to initialize the
controller hardware set-up sequence.
Note:
Always allow the initialization process to
complete. This is indicated by the
appearance of the MENU icon on the
control screen.
2. PRESS the MENU button to go to the next screen
to activate the set-up menu sequence.
3. A series of set-up screens will now be displayed.
Various control icons are used to allow you to
step through the set up instruction process.
These icons include:
A “scroll” icon indicated by an arrow
An “accept” button indicated by a tick
A “selection” icon indicated by a
Step 2 - Auto/Manual Restart
This allows the selection of the AUTO/MANUAL restart option. If
auto restart is selected the unit will automatically restart after a
power failure. In manual mode the unit will remain in standby.
SELECT the option required using the
button and ACCEPT
with the tick button.
Step 3 - Audible Alarm Enabled/Disabled
This display provides the option of either enabling the audible
alarm causing it to sound or disabling the audible alarm causing
it to remain muted whilst it flashes the alarm. SELECT the
option required using the
button and ACCEPT with the tick
button.
Start Up Screens
Auto/Manual Restart
Audible Alarm Enable/Disable
