VENTINOVA MEDICAL Evone Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 62

VENTINOVA MEDICAL Evone Скачать руководство пользователя страница 16

Instructions for Use Evone

16

G

G

2.3.3 Trolley

Evone can be placed on a trolley (G) which is an optional accessory. See Figure 2.6 A and B.

Figure 2.6 A

Figure 2.6 B

Example how to place Evone on the trolley

Evone on the Trolley

2.4 Distributed Information System

Evone facilitates being part of a Distributed Information System. Information including alarm
statuses, setting changes and measured clinical data is send via the serial port and may be used
for information purposes. In the Device settings menu ‘Basic hospital Data’ shall be chosen as the
data output format (see also section 6.1). Be aware that exported information shall not be used in
a distributed alarm system as the device needs undivided attention of the user.
Contact Ventinova Medical B.V. for information on the data protocol.

Exported data:

•  Clinical event data
  -  FCV mode data
  -  JET mode data
  -  Alarm data

•  Settings and alarm data
  -  Ventilation Settings
  -  Alarm settings
  -  Alarm status

Connection:
•  A standard RS232 cable can be used to make connection to a third ‘communication’ party.
•  The third party shall write a ‘driver’ to interpret the transmitted data and supply it into
  the Patient Data Management System.

•  Miscellaneous data
  -  Charge Status
  -  Alarm Mute
  -  Ventilation status
  -  User alarm confirm
  -  Ventilation mode
  -  JET mode take CO

2

sample

- System to shut down

«
...
14
15
16
17
18
...
»

Содержание Evone































































Отзывы:

Нет отзывов