Optional Fan Components
The following tools will be required to complete the
installation of every VCFI fan. Additional tools may be
required depending on the application and installation
location of the fan.
• Socket Wrench with 7/16 in., 1/2 in., 9/16 in.,
3/4 in. and 17mm Sockets
• 7/16 in., 1/2 in., 9/16 in. and 3/4 in. Wrenches
• Adjustable Wrench
• Torque Wrench (up to 50 ft∙lbf)
• Torque Wrench (up to 120 in∙lbf)
• Drill and 9/16 in. Drill Bit
• Phillips Screwdriver
• Level
• Impact Driver
• #2 Phillips Bit and Driver
• 3/8 in. Magnetic Nut Driver
• Magnetic Nut Driver Extension
NOTE:
Model VCFI fan components can weigh 90 lbs.
or greater depending upon the fan size and accessories
that are provided. A suitable means for lifting the weight
of the fan to the mounting point, such as a scissor lift,
should be used for all VCFI fan installations.
Required Tools
Gripple
®
Hardware Kit (Optional) Bag # 915067
No. 4 Gripple
®
(5)
DOWNTUBE & MOUNT ASSEMBLY
GUY WIRE
GUY WIRE
GUY WIRE CLAMP ASSEMBLY
GUY WIRE CLAMP BOLT
45º to 60º
No. 4 GRIPPLE
®
CONNECTOR
GUY WIRE ATTACHMENT RING
QUICK LINK
TURNBUCKLE
20 Ft. Guy Wire (4)
DOWNTUBE & MOUNT ASSEMBLY
GUY WIRE
GUY WIRE
GUY WIRE CLAMP ASSEMBLY
GUY WIRE CLAMP BOLT
45º to 60º
No. 4 GRIPPLE
®
CONNECTOR
GUY WIRE ATTACHMENT RING
QUICK LINK
TURNBUCKLE
Quick Link (8)
DOWNTUBE & MOUNT ASSEMBLY
GUY WIRE
GUY WIRE
GUY WIRE CLAMP ASSEMBLY
GUY WIRE CLAMP BOLT
45º to 60º
No. 4 GRIPPLE
®
CONNECTOR
GUY WIRE ATTACHMENT RING
QUICK LINK
TURNBUCKLE
Turnbuckle (4)
DOWNTUBE & MOUNT ASSEMBLY
UG2 GRIPPLE
®
TURNBUCKLE
GUY WIRE
GUY WIRE
GUY WIRE
GUY WIRE CLAMP ASSEMBLY
GUY WIRE CLAMP BOLT
45º to 60º
TURNBUCKLE
GUY WIRE ATTACHMENT RING
QUICK LINK
CABLE CLAMP
QUICK LINK
I-Beam Hardware Kit (Optional) Bag # 915428
I-BEAM CLAMPING PLATE
I-BEAM CLAMPING PLATE SHIM
UNIVERSAL MOUNTING PLATE
1/2 in. WASHER
1/2 in. - 13 GRADE 8 NYLON LOCKNUT
DOWNTUBE & MOUNT ASSEMBLY
1/2 in. - 13 X 2-1/2 GRADE 8 HEX BOLT
STEEL BEAM
I-Beam Clamping
Plate (2)
I-Beam Clamping
Plate Shim (2)
I-BEAM CLAMPING PLATE
I-BEAM CLAMPING PLATE SHIM
UNIVERSAL MOUNTING PLATE
1/2 in. WASHER
1/2 in. - 13 GRADE 8 NYLON LOCKNUT
DOWNTUBE & MOUNT ASSEMBLY
1/2 in. - 13 X 2-1/2 GRADE 8 HEX BOLT
STEEL BEAM
1/2 in. Washer (8)
1/2 in. – 13 Grade 8, Nylon Locknut (4)
1/2 in. – 13 x 2-1/2 in. Grade 8, Hex Bolt (4)
Steel Truss Hardware Kit (Optional) Bag # 915429
STEEL TRUSS / BAR JOIST
STRUCTURAL STEEL ANGLES
(BY OTHERS)
1/2 in. - 13 GRADE 8 HEX BOLT
(BY OTHERS)
1/2 in. - 13 GRADE 8 NYLON LOCKNUT
SQUARE WASHER PLATE
1/2 in. WASHER
STRUCTURAL STEEL ANGLES
(BY OTHERS)
STEEL TRUSS / BAR JOIST
1/2 in. - 13 GRADE 8 HEX BOLT
(BY OTHERS)
STEEL TRUSS / BAR JOIST
SQUARE WASHER PLATE
1/2 in. WASHER
1/2 in. - 13 GRADE 8 NYLON LOCKNUT
Square Washer Plate (4)
1/2 in. Washer (16)
1/2 in. – 13 Grade 8, Nylon Locknut (8)
1/2 in. – 13 x 1-1/2 in. Grade 8, Hex Bolt (4)
Wood Beam Hardware Kit (Optional) Bag # 915429
1/2 in. WASHER
1/2 in. - 13 GRADE 8
NYLON LOCKNUT
WOOD BEAM
WOOD BEAM
BRACKET
1/2 in. - 13 GRADE 8 HEX BOLT
(BY OTHERS)
Wood Beam Bracket (2)
1/2 in. – 13 x 1-1/2 in. Grade 8, Hex Bolt (4)
1/2 in. – 13 Grade 8, Nylon Locknut (8)
1/2 in. Washer (16)
Z-Purlin Hardware Kit
(Optional) Bag # 915431
Z-Purlin Backing
Plate (2)
Z-PURLIN
BACKING PLATE
1/2 in. - 13 x 1-3/4
GRADE 8 HEX BOLT
Z-PURLIN
1/2 in. WASHER
Z-PURLIN MOUNTING
BRACKET
1/2 in. - 13 GRADE 8
NYLON LOCKNUT
Z-PURLIN
BACKING PLATE
1/2 in. - 13 x 1-3/4
GRADE 8 HEX BOLT
Z-PURLIN
1/2 in. WASHER
Z-PURLIN MOUNTING
BRACKET
1/2 in. - 13 GRADE 8
NYLON LOCKNUT
Z-Purlin Mounting
Bracket (2)
1/2 in. – 13 x 1-3/4 in. Grade 8, Hex Bolt (20)
1/2 in. – 13 Grade 8, Nylon Locknut (20)
1/2 in. Washer (40)
LED Light Hardware Kit (Optional) Bag # 915436
LED Light Assembly (1)
LED Light Mounting
Bracket (1)
Hub Covering Plate (1)
1/4 in. – 20 x 3/4 in. Grade 5 Hex Bolt (6)
M10 – 1.5 x 20 in. Grade 8.8 Hex Bolt (1)
3/8 in. Washer (1)
High Volume, Low Speed Ceiling Fans
6
