Safety Retention Cable Installation
IMPORTANT:
Do not put excessive tension on the
safety retention cable during installation. The safety
retention cable should be installed with a small amount
of slack in the cable to ensure proper functioning. Do
not allow the safety retention cable to contact any sharp
edges.
NOTE:
Failure to install the safety retention cable will
result in voiding of the fan warranty.
Standard Steel Cable Clamp
The following instructions apply to standard fan
installations. For fans that were supplied with optional
Gripple
®
hardware, refer to the instructions on page 13.
Components required from Bag # 916290:
• U-Bolt Steel Cable Clamp (2)
Hardware/Tools Needed (Not Included):
• Torque Wrench
• 7/16 in. Socket and Wrench
• Cable Cutters (optional)
1. From the top of the downtube, pull the safety
retention cable until it is taut inside the downtube.
2. Wrap the loose end of the safety cable around
the mounting structure. Do not allow the cable to
come in contact with any sharp edges.
3. Align the loose end of the safety cable (referred to
as the dead-end) with the length of cable that is
wrapped around the mounting structure (referred
to as the live-end).
4. Attach the dead-end of the safety cable to the live-
end using the supplied 0.188 in. u-bolt steel cable.
IMPORTANT:
The first steel cable clamp must be
installed a minimum of 5-1/2 in. away from the dead-
end of the safety cable to ensure proper functioning.
IMPORTANT:
Steel cable clamps are composed of two
parts: the u-bolt and the saddle. Steel cable clamps
must be installed with the u-bolt over the dead-end
of the safety retention cable and the saddle over the
live-end of the safety cable. Failure to install steel
Modbus Address Settings - Dipswitch 3
Modbus
Address
Position
1
Position
2
Position
3
Position
4
Position
5
Position
6, 7, 8
2
On
Off
Off
Off
Off
Do Not
Modify
3
Off
On
Off
Off
Off
4
On
On
Off
Off
Off
5
Off
Off
On
Off
Off
6
On
Off
On
Off
Off
7
Off
On
On
Off
Off
8
On
On
On
Off
Off
9
Off
Off
Off
On
Off
10
On
Off
Off
On
Off
11
Off
On
Off
On
Off
12
On
On
Off
On
Off
13
Off
Off
On
On
Off
14
On
Off
On
On
Off
15
Off
On
On
On
Off
16
On
On
On
On
Off
17
Off
Off
Off
Off
On
18
On
Off
Off
Off
On
19
Off
On
Off
Off
On
20
On
On
Off
Off
On
21
Off
Off
On
Off
On
22
On
Off
On
Off
On
23
Off
On
On
Off
On
24
On
On
On
Off
On
25
Off
Off
Off
On
On
26
On
Off
Off
On
On
27
Off
On
Off
On
On
28
On
On
Off
On
On
29
Off
Off
On
On
On
High Volume, Low Speed Ceiling Fans
12
