Velasa Sports Sparx ES100, Руководство по эксплуатации

Страница: 26 / 208

OPERATION
22
SHARPENING NEW STEEL
To watch the How-To video, visit
sparxhockey.com/newsteel
Before loading new steel, try taking a dark
colored marker and running it down the
bottom surface of the skate blade. To ensure
you have sharpened the entire blade, inspect
the blade after running the cycles and if the
sharpening is complete, all of the marker on
the skating surface will be removed.
1
LOAD THE SKATE
Follow the instructions in “Loading a
Skate” in the Operation section of this
manual.
2
ADJUST GRINDING RING
HEIGHT
Follow the instructions in “Adjust the
Grinding Ring Height” in the Operation
section of this manual.
3
SELECT 1 CYCLES
Using the l Left and r Right Buttons ,
select 1 on the Cycle Counter .
4
CONTINUE THE SHARPENING
PROCESS
Refer to the Operation section of the
manual.
5
INSPECT BLADE SURFACE
If the marker is gone, you have successfully
set your edges. If there is still marker left
on the blade, continue running cycles until
it is completely gone. Due to variations in
blade thickness, steel quality, and edge
height difference, some new steel may
require fewer than 10 cycles, and some
more. If you are using our XG Grinding
Rings (PS100 only) , the cycle count will be
lower.