Velasa Sports Sparx ES100, Руководство по эксплуатации

Страница: 17 / 208

SETUP
13
3
INITIATE ALIGNMENT MODE
Press the c
Alignment Button
to send the
Carriage to its alignment position. When
the Carriage is in place, a tone will sound
and the case will illuminate white.
4
LOCATE THE TAB AND
GROOVE
Look through the eyepiece of the Optical
Alignment Tool
and locate the indicator
tab (A) of the Optical Alignment Tool and
the groove (B) on the Alignment Ring .
A
B
Ensure you are looking straight through
the eyepiece directly above the indicator
tab and groove. If you see the indicator
tab side wall (C) when looking through the
eyepiece, you are not directly above the
indicator tab and groove. Adjust your line
of sight until you can no longer see the
indicator tab side wall.
C
5
INSPECT THE ALIGNMENT
If the indicator tab of the Alignment Tool
is not aligned with the groove on the
Alignment Ring (as shown below), move to
step 6.
If the indicator tab of the Alignment Tool is
aligned with the groove on the
Alignment
Ring (as shown below) skip to step 8.
6
LOCATE THE ALIGNMENT
ADJUSTMENT KNOB
Open the
Glass Door
and locate the gray
y
Alignment Adjustment Knob (A) inside of
the sharpener.
A
7
ADJUST THE ALIGNMENT
While looking through the Optical
Alignment Tool , turn the Alignment
Adjustment Knob
until the groove on the
Alignment Ring (right) lines up with the
indicator tab of the Alignment Tool (left),
as shown in step 5. Close the Glass Door
when aligned.