Vega VEGAWAVE 63, Руководство по эксплуатации

Страница: 11 / 40

4 M ounting
4 . 1 G eneral instructions
I n general , VEGAWAVE 63 can be mounted in any position .
T he instrument must be mounted in such a way that the
vibrating element is at the height of the requested switching
point .
U se the recommended cables ( see chapter " C onnecting to
power supply " ) and tighten the cable gland .
Y ou can give your VEGAWAVE 63 additional protection
against moisture penetration by leading the connection cable
downward in front of the cable entry . R ain and condensation
water can thus drain o ff . T his applies mainly to mounting
outdoors , in areas where moisture is expected ( e . g . by
cleaning processes ) or on cooled or heated vessels .
F ig . 2 : M easures against moisture penetration
D o not hold VEGAWAVE 63 on the vibrating element .
E specially with fl ange and tube versions , the sensor can be
damaged by the weight of the instrument .
R emove the protective cover just before mounting .
T he process fi tting must be sealed if there is gauge or low
pressure in the vessel . B efore use , check if the seal material is
resistant against the measured product and the process
temperature .
T he max . permissible pressure is stated in chapter " T echnical
data " in the " S upplement " or on the type label of the sensor .
S witching point
M oisture
T ransport
P ressure / V acuum
VEGAWAVE 63 - - NAMUR 11
M ounting
32259
-
EN
-
070117