Vega VEGABAR 82, Руководство по эксплуатации

Страница: 57 / 96

57
9 Diagnosis, asset management and service
VEGABAR 82 • Profibus PA
45031-EN-220624
Code
Text message Cause Rectification DevSpec
Diagnosis Bits
M507
Error in the instrument
settings
Error during setup
Error when carrying out a reset Carry out reset and repeat setup Bit 22
9.5 Rectify faults
The operator of the system is responsible for taking suitable meas-
ures to rectify faults.
The first measures are:
•
Evaluation of fault messages
•
Checking the output signal
•
Treatment of measurement errors
A smartphone/tablet with the adjustment app or a PC/notebook with
the software PACTware and the suitable DTM offer you further com-
prehensive diagnostic possibilities. In many cases, the causes can be
determined in this way and the faults eliminated.
Depending on the reason for the fault and the measures taken, the
steps described in chapter " Setup " must be carried out again or must
be checked for plausibility and completeness.
Should these measures not be successful, please call in urgent cases
the VEGA service hotline under the phone no. +49 1805 858550 .
The hotline is also available outside normal working hours, seven
days a week around the clock.
Since we offer this service worldwide, the support is provided in
English. The service itself is free of charge, the only costs involved are
the normal call charges.
9.6 Exchange process module on version IP68
(25 bar)
On version IP68 (25 bar), the user can exchange the process module
on site. Connection cable and external housing can be kept.
Required tools:
•
Hexagon key wrench, size 2
Caution:
The exchange may only be carried out in the complete absence of
line voltage.
In Ex applications, only a replacement part with appropriate Ex ap-
proval may be used.
Caution:
During exchange, protect the inner side of the parts against contami-
nation and moisture.
Reaction when malfunc-
tion occurs
Fault rectification
Reaction after fault recti-
fication
24 hour service hotline