manualshive.com logo in svg

Vega VEGABAR 82, Руководство по эксплуатации

Поделиться
Скачать
Vega VEGABAR 82 Скачать руководство пользователя страница 31

31

6 Set up with the display and adjustment module

VEGABAR 82 • Profibus PA

45031-EN-220624

6  Set up with the display and adjustment 

module

6.1  Insert display and adjustment module

The display and adjustment module can be inserted into the sensor 

and removed again at any time. You can choose any one of four differ-

ent positions - each displaced by 90°. It is not necessary to interrupt 

the power supply.
Proceed as follows:
1.  Unscrew the housing lid
2.  Place the display and adjustment module on the electronics in the 

desired position and turn it to the right until it snaps in.

3.  Screw housing lid with inspection window tightly back on
Disassembly is carried out in reverse order.
The display and adjustment module is powered by the sensor, an ad-

ditional connection is not necessary.

Fig. 32: Installing the display and adjustment module in the electronics compart-

ment of the single chamber housing

Содержание VEGABAR 82

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды