manualshive.com logo in svg

Vega VEGABAR 82, Руководство по эксплуатации

Поделиться
Скачать
Vega VEGABAR 82 Скачать руководство пользователя страница 35

35

6 Set up with the display and adjustment module

VEGABAR 82 • Profibus PA

45031-EN-220624

The main menu is divided into five sections with the following func-

tions:

Setup:

 Settings, for example, to measurement loop name, applica-

tion, units, position correction, adjustment, AI FB 1 Channel - scaling 

- damping 

Display:

 Settings, e.g., for language, measured value display, lighting 

Diagnosis:

 Information, e.g. on instrument status, pointer, measure-

ment reliability, AI FB 1 simulation 

Additional adjustments:

 PIN, date/time, reset, copy function 

Info:

 Instrument name, hardware and software version, date of manu-

facture, sensor features 
To ensure optimum adjustment of the measurement, the individual 

submenu items in the main menu " 

Setup

" should be selected one 

after the other and provided with the correct parameters. The menu 

items are described in the following. 

6.5.1 Setup

An address must be assigned to each Profibus PA instrument. Each 

address may only be assigned once in the Profibus PA network. The 

sensor is only recognized by the control system if the address is set 

correctly.
When the instrument is shipped, address 126 is set. This address can 

be used to test the function of the instrument and to connect it to a 

Profibus PA network. Then the address must be changed to integrate 

additional instruments.
The address setting is carried out either via:

• 

The address selection switch in the electronics compartment of 

the instrument (address setting via hardware)

• 

The display and adjustment module (address setting via software)

• 

PACTware/DTM (address setting via software)

Hardware addressing is effective if an address less than 126 is set 

with the address selection switches on the electronics module of 

VEGABAR 82. In such case, software addressing has no effect - only 

the set hardware address applies. 

Software addressing is only effective if address 126 or higher is set 

on the instrument with the address selection switches.

In the menu item " 

Sensor TAG

" you edit a twelve-digit measurement 

loop designation. 

Main menu

Instrument address

Hardware addressing

Software addressing

Measurement loop name

Содержание VEGABAR 82

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды