manualshive.com logo in svg

Vega VEGABAR 82, Руководство по эксплуатации

Поделиться
Скачать
Vega VEGABAR 82 Скачать руководство пользователя страница 13

13

3 Product description

VEGABAR 82 • Profibus PA

45031-EN-220624

The front-flush, hygienic installation of the measuring cell acc. to 3A 

is particularly suitable for food applications. The sealings are installed 

gap-free. The additional front sealing for the measuring cell protects 

also the glass joint. A hole in the process fitting is used for leakage 

detection.

1

6

2

3

4

5

Fig. 10: Hygienic installation of the measuring cell acc. to 3-A (example: Clamp 

connection)
1  Measuring cell

2  Seal for the measuring cell

3  Process fitting

4  Additional, front seal for measuring cell

5 Diaphragm

5  Hole for leakage detection

3.3  Supplementary cleaning procedures

The VEGABAR 82 is also available in the version " 

Oil, grease and 

silicone-free

" or cleaning for paint compatible version (LABS). These 

instruments have passed through a special cleaning procedure to 

remove oil, grease and paint-wetting impairment substances (PWIS). 
The cleaning is carried out on all wetted parts as well as on surfaces 

accessible from outside. To keep the purity level, the instruments are 

immediately packed in plastic foil after the cleaning process. The 

purity level remains as long as the instrument is kept in the closed 

original packaging.

Caution:

The VEGABAR 82 in these versions must not be used in oxygen 

applications. For this purpose, devices in the special version " 

Resistance to Internal Ignition in oxygen operation according to BAM 

certification

" are available. 

3.4  Packaging, transport and storage

Your instrument was protected by packaging during transport. Its 

capacity to handle normal loads during transport is assured by a test 

based on ISO 4180.
The packaging consists of environment-friendly, recyclable card-

board. For special versions, PE foam or PE foil is also used. Dispose 

of the packaging material via specialised recycling companies.

Transport must be carried out in due consideration of the notes on the 

transport packaging. Nonobservance of these instructions can cause 

damage to the device.

The delivery must be checked for completeness and possible transit 

damage immediately at receipt. Ascertained transit damage or con-

cealed defects must be appropriately dealt with.

Installation in hygienic 

fitting acc. to 3-A

Packaging

Transport

Transport inspection

Содержание VEGABAR 82

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды