manualshive.com logo in svg

Vaz 2113. 2114, Руководство по эксплуатации, Страница: 7 / 52

Поделиться
Скачать
Vaz 2113. 2114 Скачать руководство пользователя страница 7

7

from outside, with button 1 fully up. We
recommend you to use the lock in this
manner when there are children on the
rear seat.

The rear door window can go only

part way down when you use window
winder 3.

Some vehicle options include central

door locking system, which may be
engaged by locking the driver’s door
with a key or by depressing its lock
knob. The doors can be unlocked indi-
vidually by pulling up respective but-
tons.

It is not recommended to interlock

the doors while driving the car to
ensure the doors can be opened from
outside in the event of an accident.

Do not open the doors violently or

leave them open at a parking place

exposed to strong wind to avoid their
deformation.

During cold seasons when ice or

snow may cover the windows hamper-
ing their movement, do not apply
excessive force to wind the windows for
it may damage the mechanism.

Tailgate

To open the tailgate, first unlock it

using a key, then depress button 1 (Fig.
5).  The tailgate is held open by tele-
scopic struts 3. Remove parcel shelf 4
to clear access to the luggage com-
partment.

BONNET

To open the bonnet, pull handle 1

(Fig. 6), then lift the bonnet, and reach-
ing through the gap, depress hook 1

Fig. 5. Tailgate

RE2115eng  23/04/2002  15:23  Page 7

Содержание 2113. 2114





















































Отзывы:

Нет отзывов