manualshive.com logo in svg

Vaz 2113. 2114, Руководство по эксплуатации, Страница: 10 / 52

Поделиться
Скачать
Vaz 2113. 2114 Скачать руководство пользователя страница 10

knob 2 (Fig. 11, 12). View «A» shows
the front seat arrangement for comfort-
able rest.

To let the rear passenger in and out

(VAZ 2113 and modifications), move up
lever 3 and tilt the front seat backrest
forward.

To increase the luggage space (7),

do the following (for VAZ 2113, VAZ
2114 and modifications):

— remove parcel shelf 8 and place it

along the rear wall of the boot (see
view «B» in Fig. 11);

— pull loop 5 and put the cushion

vertically.

— move lever 6 to the right, release

the backrest and fold it down. When
necessary, move the front seat forward;

Headrests 4 (Fig. 11, 12) are height

and tilt adjusted. They are held in posi-
tion by retainer springs.

The rear seat of VAZ 2115 can be

transformed to increase the luggage
compartment space for various car-
goes transportation. Fold the rear seat
as follows:

— pull loop 2 (Fig. 13) to place cush-

ion 1 vertically;

— remove headrests, then shift

lever 3 to the right, release backrest 4
and place it as shown in the illustration.
When necessary, move the front seats
forward.

STEERING RAKE 

ADJUSTMENT

Following adjustment of the seat

position, tilt the steering column to a
position most suitable for comfortable
driving. Move lever 1 (Fig. 14) down,
then select a desired tilt angle of the
steering column and shift the lever up
to lock the column in this position.

SEAT BELTS AND AIRBAG

In order to fasten a seatbelt, slip

tongue 1 (Fig.15) into buckle 2 to hear
a click. Check to see, that the straps
are not twisted.

To unfasten the belt, push button 3

of the buckle.

The passengers, sitting in the rear,

fasten their belts similarly. The occu-

10

Fig. 13. VAZ-2115 rear seat 

transformation

Fig. 12. Front seat

RE2115eng  23/04/2002  15:23  Page 10

Содержание 2113. 2114





















































Отзывы:

Нет отзывов