background image

Getting to know your machine 

Getting started

Assembling your Cordless Slim Vac

Line up the connector on 

the reach wand with the 

Powered Head. Push the 

reach wand down onto 

the Powered Head until it 

clicks into place.

Push the handheld down 

onto the reach wand until 

it clicks into place. 

The upright slim vacuum 

cleaner is not free standing 

and in between uses must 

always be placed in the wall 

bracket or laid flat on the 

floor, in a suitable location 

so it does not become a trip 

hazard or can be stepped on.

PLEASE READ ‘LET’S TALK SAFETY’ AT THE BEGINNING BEFORE USE

Name 

Cordless Slim Vac

Battery voltage 

See product rating label

Run time 

24 minutes

*

Charge time 

5 hours

Weight 

2.1 kg

Dust bin capacity 

0.6L

Technical Specification

Subject to technical change without notice. Turn off brushbar on hard floors.  Images are illustrative only.

Post-motor filter 

1-7-137849

3-in-1 tool 

1-9-137854

Accessories & Consumables

 

To purchase consumables and 

accessories, please visit 

vax.co.uk

Before you begin 

 

CAUTION

: Always switch off the vacuum cleaner before connecting or disconnecting the handheld/attachments  

or removing and emptying the dirt container.

IMPORTANT:

 The vacuum cleaner is equipped with overheat protection. If for any reason the vacuum cleaner does 

overheat the thermostat will automatically turn the vacuum cleaner off. If this happens, remove the battery. Remove 

and empty the dirt container also check the vacuum cleaner for blockages. Allow the vacuum cleaner to cool for 

approximately 1 hour (if you have cleaned the filter please wait 24 hours for the filter to fully dry before putting back 

into the machine). 

For best cleaning results, filters require cleaning at least every 3 months and should be replaced every 12 months 

depending upon use. If the vacuum cleaner is blocked, remove the battery before removing the blockage.

CAUTION

: This vacuum cleaner is not free standing. In between uses or when carrying out any maintenance  

always lie flat on the floor in a suitable location so it does not become a trip hazard or can be stepped on.

Brushbar On/Off button

On/Off and charging light

Handheld release button

Reach wand

Power head/accessory 

release clip

Powered Head

Brushbar

Battery charger inlet

Filter cover release buttons

Dirt container release 

button (hidden)

Battery release  

button

Handle

Dirt release button

Dirt container

On/Off trigger

Battery

Continuous power  

latch (hidden)

Содержание Cordless Slim Vac TBTTV1B1














Отзывы: