Using your machine
Using as a handheld vacuum cleaner
Using your machine
Using as a reach slim vacuum cleaner
Press the Power Head/
accessory release clip
and pull to remove the
Powered Head from the
reach wand.
Choose an accessory
(pictures illustrated
dependent upon model).
Push the chosen
accessory into the
reach wand until it
clicks into place.
Squeeze the trigger
located underneath the
handle, the machine will
switch ‘On’. The On/Off
and charging light will
illuminate green indicating
the power is on and the
machine is charged.
Release the trigger to
switch the machine ‘Off’.
The reach wand can be used for hard to reach places.
Squeeze the trigger and
push the ‘Continuous
power latch’ towards the
trigger. This will lock it
into the ‘On’ position and
will continue to power the
machine without having
to hold in the trigger.
Push the latch away from
the trigger to unlock and
release the trigger.
The reach wand can be used for hard to reach places
and at different heights for above floor cleaning.
The upright slim vacuum
cleaner is not free standing
and in between uses must
always be placed in the
wall bracket or laid flat
on the floor, in a suitable
location so it does not
become a trip hazard or
can be stepped on.
Always take extra care when using the vacuum cleaner on the stairs.
Press the handheld
release clip. Pull to
separate the handheld
from the reach wand.
The reach wand when
attached to the Powered
Head/accessory is not
free standing, place safely
and securely to one side.
Choose an accessory
(pictures illustrated
dependent upon model).
Push the chosen
accessory into the
handheld until it
clicks into place.
All of the accessories
including the Powered
Head can be attached
directly onto the handheld.
Squeeze the trigger and
push the ‘Continuous
power latch’ towards the
trigger. This will lock it
into the ‘On’ position and
will continue to power the
machine without having
to hold in the trigger.
Push the latch away from
the trigger to unlock and
release the trigger.
Squeeze the trigger
located underneath the
handle, the machine will
switch ‘On’. The On/Off
and charging light will
illuminate green indicating
the power is on and the
machine is charged.
Release the trigger to
switch the machine ‘Off’.
