Using your machine
Charging the battery
CAUTION:
Do not use the vacuum cleaner when the machine is plugged in and charging.
CAUTION:
For best performance the terminals on the battery and vacuum cleaner must be clean and free from
dust and dirt. The life expectancy of the battery will vary depending on the usage of the vacuum cleaner.
The On/Off and charging light will illuminate
continuously whilst the charger is connected.
Red light – The battery is charging.
Green light – The battery is charged (after 5 hours).
If charging for the first time the initial charge
time is 8 hours.
Getting started
Using as a slim vacuum cleaner
Squeeze the trigger
located underneath the
handle, the machine will
switch ‘On’. The On/Off
and charging light will
illuminate green indicating
the power is on and the
machine is charged.
Release the trigger to
switch the machine ‘Off’.
Squeeze the trigger and
push the ‘Continuous
power latch’ towards the
trigger. This will lock it
into the ‘On’ position and
will continue to power the
machine without having
to hold in the trigger.
Push the latch away from
the trigger to unlock and
release the trigger.
Press the brushbar’s
On/Off button to activate.
Repeat this process to
de-activate the brushbar.
The brushbar should be
switched ON for carpets
and OFF for hard floors.
CAUTION:
This vacuum cleaner has a constantly rotating brushbar when the brushbar ‘ON’ is selected.
Never leave the vacuum cleaner in one spot for an extended period of time as this may damage the floor surface.
The brushbar should be ON for carpets and OFF for hard floors.
When the vacuum
cleaner is in use the On/
Off and charging light
will illuminate and flash
red when the battery
is running low. When
the red light flashes the
machine will turn off in 20
seconds. The user should
recharge the machine.
