Varta element 6, Инструкция по эксплуатации

Страница: 106 / 118

106
Subject to alteration! Updated 11/2015
11.4 Completion of service and repair work
DANGER!
The battery storage system components
conduct current after a restart. .
Mortal danger from electric shock!
Once all work is complete, restore connections
and attachments to a clean condition and
check!
Make sure nobody is in the hazard zone before
connecting the power supply!
11.4.1 Checking operating state

Make sure that no contamination or material residues are
inside the device. Clean using a vacuum cleaner or
similar if necessary.

Switch the master battery module back on.

Close the door and secure with screws.

Check whether the fuses have been re-connected.

Switch on the energy storage system using the On/Off
button. The button engages.

Check whether the LED ring indicates the following
operating states after switch on:

(1) flashes green (approx. 90 s),

(2) illuminates green (approx. 60 ) and then

(3) pulses green (= charging or discharging) or flashes
every 3 s (= standby).