background image

8

Värmebaronen  EP- 900, -1080, -1200, -1400

  Red indicator

 

 Off:  normal. 
Flashing: serious fault. 
The display shows the cause when 

 is pressed.

  Yellow indicator

 

 Off:  normal. 
Flashing: warning. 
The display shows the cause when 

 is pressed.

  Green indicator

 

 On:  normal. 
Flashing: something is preventing power increase/
decrease. 
The display shows the cause when 

 is pressed.

I

  Used to restart the boiler after a power cut.

O

  Breaks the power supply to the boiler by tripping the 

boiler's load-break switch. The voltage to the control 
circuit is not broken!

Control panel

  Moves the index arrow up between rows of editable con-

tent. Set/change the content with the UP/DOWN arrow. 
Parameters with a large setting range have a fast move 
function when the button has been pressed for a while.

  Moves the index arrow down between rows of editable 

content. Set/change the content with the UP/DOWN 
arrow. Parameters with a large setting range have a fast 
move function when the button has been pressed for a 
while.

  Press the RIGHT arrow to select the highlighted line. Set/

change the content with the UP/DOWN arrow.

 -

  Confirms a change and jumps back to the current menu. 

Changes made take immediate effect when you press 
OK.

Display

Shows status, alarms, etc. The display returns to the Operat-
ing menu a minute after any button has been pressed.

Operation and maintenance

O

 

 VÄRMEBARONEN AB 

 

 EP600-....-.... 

 VERS 0.01 

 (ENGLISH) 

 

 >>>>>>>>>><<<<<<<<<<

Содержание EP 900









































Отзывы: