Varifan DIP-1C, Инструкция по установке и эксплуатации

Страница: 24 / 42

DIP-1C USER’S GUIDE
Section C-24 DIP-1C
Unit 1 Variable Position (POS 3)
Variable 1 Start Position
1-STR
This parameter is used to establish the position the inlet will take when
variable 1 of unit 1 runs at its minimum speed. When variable 1 of unit 1
runs above its minimum speed, the inlet’s opening will modulate from this
position to
Variable 1 End Position . When the Outside Temperature is
used, this parameter will not be adjustable, but will instead be calculated
according to the
Outside Temperature , Winter Minimum Position ,
Winter Temp , Summer Minimum Position , Summer Temp . When the
Outside Temperature is not used, this parameter is adjusted in 1%
increments from 0% to 100%.
Variable 1 End Position
1-END
This parameter is used to establish the position the inlet will take when
variable 1 of unit 1 runs at its maximum speed. This parameter is adjusted
in 1% increments from 0% to 100%.
Variable 2 Start Position
2-STR
This parameter is used to establish the position the inlet will take when
variable 2 of unit 1 runs at its minimum speed. When variable 2 of unit 1
runs above its minimum speed, the inlet’s opening will modulate from this
position to
Variable 2 End Position . This parameter is adjusted in 1%
increments from 0% to 100%.
Variable 2 End Position
2-END
This parameter is used to establish the position the inlet will take when
variable 2 of unit 1 runs at its maximum speed. This parameter is adjusted
in 1% increments from 0% to 100%.
www.monitrol.com