Varifan DIP-1C Скачать руководство пользователя страница 2

Страница: 2 / 42

DIP-1C WIRING DIAGRAM

Section A-2

DIP-1C

WARNINGS AND PRECAUTIONS

Although the manufacturer has made every effort to ensure the accuracy of the

information contained herein, this document is subject to change without notice due to

ongoing product development.

WARNINGS AND PRECAUTIONS

Equipment, probe failure, blown fuses and/or tripped breakers may prove harmful to the

contents of the building. Therefore it is strongly recommended to install backup devices

and alarm or warning devices. Spare equipment should also be available at the owner’s

site. Equipment manufactured by the manufacturer is protected against normal line

surges. High surges caused by thunderstorms or power supply equipment may damage

this equipment. For added security against line voltage surges it is recommended that

surge and noise suppression devices be installed at the electrical distribution panel. Use

of shielded cable for probes is recommended for protection against lightning. These

devices are available from most electrical supply distributors.

RECOMMENDATIONS

The manufacturer recommends that all installation procedures described herein be

performed by a qualified electrician or installation technician. Furthermore the

manufacturer recommends testing all the functions and equipment connected to the DIP-

1C, including the alarm system and backup devices, after installation, after changes to

the installation and every month after that.

Fuse verification and replacement, as well as the proper setting of control values shall

be the responsibility of the owner of this equipment.

www.monitrol.com

Содержание DIP-1C











































Результаты поиска

Содержание DIP-1C

Отзывы:

Похожие инструкции для DIP-1C

Бренды по названию

Популярные бренды

Varifan DIP-1C, Инструкция по установке и эксплуатации

Результаты поиска

Содержание DIP-1C

Отзывы:

Похожие инструкции для DIP-1C

Бренды по названию

Популярные бренды