Varian ProStar 363, Руководство по эксплуатации

Страница: 13 / 90

Installation
ProStar 363 Fluorescence Detector 7
Installation of Door Cap
If the ProStar 363 is the top module in the stack, the door cap
should be installed prior to installing the door on the module. If
the ProStar 363 is not at the top of the stack, do not install the
cap and proceed to the next section describing door installation.
Take the cap from the accessory kit and remove the protective
paper exposing the adhesive that will attach the cap to the door.
Orient the door and cap as shown in Figure 3 with the door
standing on a flat surface. Insert cap into door and press
adhesive onto inside of door lip as shown in Figure 4. Be sure to
keep door edges and cap edges flush.
Figure 3 Door and Door Cap Orientation
Magnetic
door latch
Adhesive side down