VARI
❋
LITE
®
- VL2500™ W
ASH
L
UMINAIRE
S
ERVICE
M
ANUAL
22
09-December-2004
02.9676.0022 0
Front Assembly Removal
This procedure may be necessary to gain access to other components.
To remove and re-install front assembly:
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. At head cover, turn two captive screws one-quarter turn and remove cover. (It
will remain attached by tether.)
Figure 2-7
.
Step 3. Remove front nose cover by removing two 10-32
×
1/2" PPB screws (one on
each side).
Figure 2-7: Front Assembly Removal
Step 4. At junction connector, disconnect edge motor wiring.
Step 5. Face head nose upward. At front of bulkhead, using #2 Phillips long handle
screwdriver, remove four 6-32 X 3/8" PPB screws, and pull front assembly
out of head assembly.
Step 6. Re-install front assembly by performing Steps 2–5 in reverse order. While re-
installing, connect wiring harness connection and route wires ensuring no
wires are pinched.
Captive Screws
Removable Cover
Front Nose Cover
Screw (2)
Front Assembly
Fixed Color Bulkhead
Содержание VL2500 Spot Luminaire
