VARI
❋
LITE
®
- VL2500™ W
ASH
L
UMINAIRE
S
ERVICE
M
ANUAL
20
09-December-2004
02.9676.0022 0
Standard Color Filter Replacement
Parts:
Color Filter as required
To remove and replace a standard color filter:
Step 1. Disconnect luminaire AC input cable from power source.
Step 2. At head cover, turn two captive screws and remove cover. (It will remain
attached by tether.)
Figure 2-4
.
Note:
In some cases it is easier to slide bulkhead partially out of head assembly to
access color filters. To do this, use #2 Phillips screwdriver to turn captive screw one-
quarter turn and slide bulkhead upward.
Step 3. Remove CYM crossfade color assembly.
Step 4. Rotate wheel until required filter is accessible.
CAUTION:
Do not touch filters with bare fingers. Wear cotton gloves or other
covering while replacing.
Step 5. Using fingers, pull filter out of wheel.
Figure 2-5
.
Step 6. Noting proper orientation of carrier slot, insert new color filter into position
and push fully into place.
Step 7. Re-install CYM crossfade color assembly and re-install head cover.
Figure 2-5: Standard Color Filter Replacement
Color Filter
Wheel
Color Filter
Carrier Slot
Содержание VL2500 Spot Luminaire
