VARI
❋
LITE
®
- VL2500™ W
ASH
L
UMINAIRE
S
ERVICE
M
ANUAL
26
09-December-2004
02.9676.0022 0
Step 5. In replacement convex lens assembly, using 1/4" Allen Wrench, adjust 8-32
X 2" screw so that screw head is nearly flush with drive bushing plate to
create a .020" gap between concave and convex lens assemblies.
Step 6. Slide replacement convex lens assembly and then old concave lens assembly
onto lens shafts.
Step 7. Hold convex and concave lens assemblies together, and using #2 Phillips
screwdriver, re-install four #8 lock washers and four 8-32 X 1/2" PPB
screws, and tighten to keep lens assemblies aligned.
Step 8. Re-install four 6-32 X 3/16" PPB screws and four #6 lock washers securing
concave lens assembly to lens support arm.
Step 9. Using 1/4" nutdriver, re-install one 4-40 KEPS nut on end of beam spreader
motor assembly shaft.
Содержание VL2500 Spot Luminaire
