manualshive.com logo in svg

Varec Network Adapter 4000, Инструкция по установке и эксплуатации, Страница: 27 / 80

Поделиться
Скачать
Varec Network Adapter 4000 Скачать руководство пользователя страница 27

17

4000

Configuration

3.4.3

Configuration Menu

Configuration Menu

Description

Level Units

Level units used for display and Modbus data. FT-IN-16TH, M, 

or FT are valid. Use F1/F2 to select.

Temp Units

Temperature units used for display and Modbus data. F, C, or K 

are valid. Use F1/F2 to select.

Level Sensor

Direction of gauge. Forward/Reverse

Calib Level2

Command used to calibrate to a new level. Pressing F4 causes 

ATT to ask for the current level to be entered.

Batt Off2

Command used to turn the battery off. Pressing F4 causes the 

battery to be turned off.

Damping

Damping value used for level and temperature readings. 0-16 

is valid.

Temp Sensor

Type of temperature sensor attached. None, Copper RTD, or 

Platinum RTD are valid. Use F1/F2 to select.

Manual Temperature

If there is no temperature sensor, this is the value displayed 

and returned for temperature.

Noise Reject

Sets up the noise rejection for the A/D. 50 and 60 Hz are valid. 

Use F1/F2 to select.

Critical High Level

Critical high level alarm setpoint.

Advisory High Level

Advisory high level alarm setpoint.

Advisory Low Level

Advisory Low LevelAdvisory low level alarm setpoint.

Critical Low Level

Critical low level alarm setpoint.

Level Deadband

Deadband used for level alarms.

Critical High Temp

Critical high temperature alarm setpoint.

Advisory High Temp

Advisory high temperature alarm setpoint.

Advisory Low Temp

Advisory low temperature alarm setpoint.

Critical Low Temp

Critical low temperature alarm setpoint.

Temp Deadband

Deadband used for temperature alarms.

Содержание Network Adapter 4000

















































































Отзывы:

Нет отзывов