manualshive.com logo in svg

Varec Network Adapter 4000, Инструкция по установке и эксплуатации, Страница: 24 / 80

Поделиться
Скачать
Varec Network Adapter 4000 Скачать руководство пользователя страница 24

Configuration

Tank Gauge Transmitter

14 

Installation and Operations Manual

3.4

Menu Operation

For example, when the Main Menu is displayed on the top line, pressing F1 (Up) will 

scroll up through the possible main menu selections while pressing F2 (Down) will scroll 

down through the possible main menu selections.

Pressing F4 (Enter) will cause the selection of the sub-menu displayed on lines two and 

three (such as Config Menu). Scrolling through a sub-menu is performed in the same 

manner as scrolling through the Main Menu using the F1 and F2 keys. 

To return to the Main Menu, press the PREVIOUS FUNCTION key [

 

], as shown in 

Figure 3-3 on page 13.

When a parameter is encountered which is to be changed, pressing the F3 key (Alter) will 

cause the display of the current parameter in a form which permits its modification. 

When a specific set of parameters is available, the F1 and F2 keys can be used to scroll 

through the valid selections. When the desired selection is displayed, pressing the F4 

key (Enter) will cause selection of the new parameter. When the parameter consists of 

numeric or free format characters, the Model 1200 keyboard can be used to enter the 

parameter. Note that parameter alteration is not final until the session is completed with 

the EXIT AND SAVE command from the Main Menu.

To complete parameter alteration, scroll through the Main Menu until the following 

display is presented, then press F4 (Enter) to exit and save the altered parameters.

If parameter alteration is to be aborted (new parameters not saved), scroll through the 

Main Menu until the following display is presented and press F4 (Enter) to quit without 

saving alterations. The QUIT or EXIT AND SAVE commands must be initiated before 

turning off or disconnecting the 1200 Hand Held Terminal.

Содержание Network Adapter 4000

















































































Отзывы:

Нет отзывов